12 volt water pressure pump.
Jabsco Par max 2.9 - 12 volt water pressure pump, easy to install with interchangeable quad port connections. Quad port connections have either 13mm (½”) hose tail connections or ½” bsp threaded connections, this makes this pump easy to fit whether you have a Shurflow, Flojet or Johnson water pressure pump unit. Tech Spec
STANDARD PRESSURE MODELS
1.7bar (25psi)
31395-0292 JABSCO 2.9 12 volt dc
OUTPUT – 11 litres/minute
(2.9 gallons/minute) open flow
PRESSURE SWITCH - STANDARD
PRESSURE MODELS– cuts in at 1bar
(15psi) – cuts out at 1.7bar (25psi)
CONNECTIONS - for 13mm (½”) bore
hose or Hep2O push-fit connectors
CW193
DIMENSIONS – 230mm long, 110mm
wide,110mm high
WEIGHT – 1.8kg
RECOMMENDED FUSE SIZE –
12 volt - 10 amp, 24 volt - 5 amp
Efficient, self-priming pump
serving up to 3 outlets
Multi-diaphragm design self-primes
to 2m vertical lift, can run dry without
damage
Built-in by-pass feature - less
pulsation
No accumulator tank required
Supplied with snap-in ports for hose
or Hep2O connectors
Quiet running, smooth flow
Motor protected by automatic
thermal overload cut-out
Note:
Standard pressure 1.7bar (25psi)